Thanks for shopping at our small West Slope Colorado family run business! 

FREE SHIP OVER $10

Spend $20 = FREE WRAP!

Water Bottle Wraps

Wrap-around stickers designed to fit standard water bottles — Hydro Flask, Yeti, Stanley, and any insulated bottle. Waterproof and dishwasher-safe out of the package (they also look great on cars, laptops, and coolers). 

Wrap-Around Water Bottle Stickers, Made to Fit Every 32oz Bottle

A water bottle wrap is one long sticker that covers the full circumference of your bottle in a single application. Instead of piecing together five small stickers that overlap and peel, you get one continuous illustration — a mountain range, wildflower meadow, forest or national park — that reads as a single piece of art from any angle. Every wrap is silkscreen-printed in Colorado, sized for standard 32oz insulated bottles, and built to survive years of dishwasher cycles.

Which Bottles Do Our Wraps Fit?

Our wraps are 10" long by 2.75" tall, sized for the industry-standard 32oz insulated bottle:

  • Hydro Flask 32oz Wide Mouth — fits with a slight overlap at the seam.
  • Yeti Rambler 26oz and 36oz — the 36oz fits perfectly; the 26oz leaves a small gap.
  • Stanley Quencher 30oz and 40oz — slightly wider, so expect a small gap.
  • RTIC 32oz — near-identical to Hydro Flask, fits perfectly.
  • Owala FreeSip 32oz — align the wrap on the widest section.
  • Nalgene 32oz Wide Mouth — the smooth plastic holds our adhesive even better than powder coat.

Rule of thumb: any straight-sided bottle between 8 and 10 inches around will work. Heavily tapered bottles don't wrap cleanly.

Why Our Water Bottle Wraps Don't Peel

Most wraps sold online are printed on cheap indoor vinyl that lifts at the edges within weeks. Ours are silkscreen-printed with an aggressive adhesive made for powder-coated bottles — it flows into the textured finish on Hydro Flasks and Yetis instead of grabbing only the high points. They're 100% waterproof and dishwasher-safe, with no Mod Podge or sealing spray needed. More detail is in our sticker care guide.

How to Apply a Water Bottle Wrap

  1. Clean the bottle with 70%+ isopropyl alcohol and let it dry completely.
  2. Peel the backing paper off the wrap, not the wrap off the paper, so the vinyl doesn't bend.
  3. Align the top edge first, holding the bottle horizontally.
  4. Roll the bottle away from you, pressing the wrap down from the center outward to push out air.
  5. Burnish the top and bottom edges firmly with your thumbnail or a card.

Water Bottle Wrap FAQ

What is a wrap-around water bottle sticker?

One long sticker, 10" long by 2.75" tall, that covers the full circumference of a standard 32oz insulated bottle in a single application.

Do water bottle wraps fit Hydro Flask, Yeti and Stanley?

Yes. They fit Hydro Flask 32oz Wide Mouth, Yeti Rambler 36oz, Stanley Quencher, RTIC, Owala and Nalgene bottles. Shorter tumbler-style bottles like the Yeti 26oz may show a small vertical gap.

What size sticker wrap fits a 32oz water bottle?

10 inches long by 2.75 inches tall, which is how our wraps are cut.

Are water bottle wraps waterproof and dishwasher-safe?

Ours are. They're silkscreen-printed for outdoor use and go through the dishwasher without sealing. Many other brands need Mod Podge or acrylic spray to survive it.

Do sticker wraps peel off water bottles?

Only if the bottle isn't prepped. Clean with isopropyl alcohol, roll the wrap on evenly, and burnish the edges — done right, the wrap outlasts the bottle.

How do you apply a wrap without bubbles?

Hold the bottle horizontally, align the top edge first, then slowly rotate the bottle away from you while pressing the wrap down from the center out.

Own a store? Our water bottle wraps and stickers are available wholesale for gift shops, park stores and outdoor retailers, with a free display on your first order. See wholesale →